Teknobond HR Paint is specially developed for various applications where heat resistance to specific temperature range is required. HR 250 Paint Black is designed for temperature resistance up to 250°C and it is available in matt, semi-gloss, and glossy finishes.
Range of Application:
Specifications:
Composition: Heat Resistant Black Pigment, fused silica with silicone modified binder & solvent combination
| Property | Details |
|---|---|
| Colour | Black |
| % NVM by volume | 40-42% |
| Finish | Matt to eggshell / semi-glossy / glossy. |
| Viscosity by B4 cup at 30°C | 30 to 45 sec |
| Drying Time | Surface Dry: 30-45 Minutes. Tack free: 1 1/2hrs - 2 hrs maximum Hard Dry: over Night |
| Stoving Schedule | 1200 / 30-40 minutes. |
| Resistance to Heat (Dry Heat) | Maximum 2500C |
| Adhesion | Excellent. |
| Exterior Durability | Excellent. |
| Corrosion Resistance | 5% NaCL Salt Spray - 200 hrs. Minimum |
| DFT Recommended | 20-25 lit in single Coat. |
| Over Coating Interval | After 2 hrs & Before 7 days. |
| Flash Point | Above 300C |
| Shelf Life in Packed Condition | 6 Months. |
Application:
HR 250 Paint Black can be applied by brush or spray on primed & unprimed surfaces. For galvanized steel or aluminium or stainless steel, etch primer is recommended as undercoat. Apply minimum 2 coats with or without diluting the paint to get dry film thickness not more than 25 µ per coat. Thicker film may peel-off on edging.
Key Properties :